Wednesday, 27 March 2013

DIGITAL ELECTRONICS ANNA UNIVERSITY PREVIOUS YEAR QUESTION PAPER, IMPORTANT QUESTIONS, 2 MARKS AND 16 MARKS QUESTIONS FOR ECE DEPARTMENT


EC2203  DIGITAL ELECTRONICS ANNA UNIVERSITY PREVIOUS YEAR QUESTION PAPER, IMPORTANT QUESTIONS, 2 MARKS AND 16 MARKS QUESTIONS FOR ECE DEPARTMENT

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2009.
Third Semester
Electronics and Communication Engineering
EC 2203 — DIGITAL ELECTRONICS
(Regulation 2008)
Time : Three hours Maximum : 100 Marks
Answer ALL Questions
PART A — (10 × 2 = 20 Marks)
1. Prove that the logical sum of all minterms of a Boolean function of 2 variables is 1.
2. Show that a positive logic NAND gate is a negative logic NOR gate.
3. Suggest a solution to overcome the limitation on the speed of an adder.
4. Differentiate a decoder from a demultiplexer.
5. Write down the characteristic equation for JK flipflop.
6. Distinguish between synchronous and asynchronous sequential circuits.
7. Compare and contrast static RAM and dynamic RAM.
8. What is PAL? How does it differ from PLA?
9. What are Hazards?
10. Compare the ASM chart with a conventional flow chart.



PART B — (5 × 16 = 80 Marks)
11. (a) (i) Express the Boolean function Z X XY F + = in product of Maxterm.
(6)
(ii) Reduce the following function using K-map technique
( ) ( ) ( ) 6 , 2 14 , 12 , 10 , 8 , 7 , 4 , 3 , 0 , , , d D C B A f + = π . (10)
Or
(b) Simplify the following Boolean function by using Quine-Mcclusky method
( ) ( ) ∑ = 13 , 12 , 10 , 8 , 7 , 6 , 3 , 2 , 0 , , , D C B A F . (16)
12. (a) Design a carry look ahead adder with necessary diagrams. (16)
Or
(b) (i) Implement full subtractor using demultiplexer. (10)
(ii) Implement the given Boolean function using 8 : 1 multiplexer
( ) ( ) ∑ = 6 , 5 , 3 , 1 , , C B A F . (6)
13. (a) (i) How will you convert a D flipflop into JK flipflop? (8)
(ii) Explain the operation of a JK master slave flipflop. (8)
Or
(b) Explain in detail the operation of a 4 bit binary ripple counter. (16)
14. (a) Implement the following Boolean functions with a PLA
( ) ( ) ∑ = 4 , 2 , 1 , 0 , , 1 C B A F
( ) ( ) ∑ = 7 , 6 , 5 , 0 , , 2 C B A F
( ) ( ) ∑ = 7 , 5 , 3 , 0 , , 3 C B A F . (16)
Or
(b) Design a combinational circuit using a ROM. The circuit accepts a three
bit number and outputs a binary number equal to the square of the input
number. (16)
15. (a) Design a three bit binary counter using T flipflops. (16)
Or
(b) Design a negative-edge triggered ‘T flipflop’. (16)


EC2353 ANTENNA AND WAVE PROPAGATION ANNA UNIVERSITY MODEL QUESTION PAPER | AWP EC2353 QUESTION PAPER NOVEMBER/DECEMBER 2011


Subject Name : ANTENNA AND WAVE PROPAGATION
Subject Code : EC 2353
Semester : Sixth Semester
Department :
Electronics and Communication Engineering

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2011.
Sixth Semester
Electronics and Communication Engineering
EC 2353 —ANTENNA AND WAVE PROPAGATION
(Regulation 2008)
(Common to PTEC 2353 - Antenna and wave Propagation for B.E.( Part- time)
Fifth Semester Electronics and communication Engineering -Regulation 2009)

PART A — (10 × 2 = 20 marks)

1. What is the significance of gain of an antenna?
2. Define effective aperture of an antenna.
3. Why is loop antenna called as magnetic dipole?
4. Define Pattern Multiplication.
5. State Babinet’s Principle.
6. What are the limitations of Lens antenna?
7. Why is log periodic antenna called so?
8. What are the features of microstrip antenna?
9. Define Critical frequency.
10. What is meant by Faraday rotation?


PART B — (5 × 16 = 80 marks)

11. (a) What are Hertizian dipoles? Derive the Electric and magnetic field quantities of Infinitesimal dipole and radiation pattern. (16)
Or
(b) Explain the following parameters of an antenna:
(i) Beam solid angle
(ii) Radiation pattern
(iii) Gain
(iv) Polarization
(v) Bandwidth. (16)
12. (a) Derive the field quantities and Radiation resistance of a half wavelength dipole. (16)
Or
(b) An antenna array consists of two identical isotropic radiators spaced by a distance of d= λ/4 meters and fed with currents of equal magnitude but with a phase difference ‘β’. Evaluate the resultant radiation for β=0o and thereby identify the direction of maximum radiation. (16)
13. (a) Explain the radiation mechanism of Microwave Horn antenna with diagram. (16)
Or
(b) Explain the special features of Parabolic Reflector antenna and discuss on different types of feed used with neat diagram. (16)
14. (a) With a neat sketch, explain the construction and operation of Multielement Yagi- Uda antenna. (16)
Or
(b) With necessary illustrations explain the radiation characteristics of microstrip antenna and mention its possible application. (16)
15. (a) (i) Explain the mechanism of ionospheric propagation with neat diagram. (8)
(ii) Discuss the effects of Earth’s magnetic field on ionosphere radio wave propagation? (8)
Or
(b) (i) Explain important features of ground wave propagation? (10)
(ii) Explain the terms:
(1) Optimum working frequency
(2) Skip distance
(3) Virtual height. (6)

OBJECT ORIENTED ANALYSIS AND DESIGN CS2353 ANNA UNIVERSITY NOVEMBER/DECEMBER 2011 QUESTION PAPER | OOAD CS 2353 PREVIOUS YEAR MODEL QUESTION PAPER


B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2011.
Sixth Semester
Computer Science and Engineering
CS 2353 — OBJECT ORIENTED ANALYSIS AND DESIGN
(Common to Information Technology)
(Regulation 2008)
                                                          
Answer ALL questions.
PART A — (10 × 2 = 20 marks)
1. List out any four reasons for the complexity of software.
2. What do you mean by use cases and actors?
3. Give the hint to identify the attributes of a class.
4. Define swim lane.
5. What do you mean by sequence diagram? Mention its use.
6. What do you mean by sequence number in UML? Where and for what it is
used?
7. Distinguish between coupling and cohesion.
8. Write a note on Patterns.
9. Define component with an example.
10. How will you reflect the version control information in UML diagram?


PART B — (5 × 16 = 80 marks)


11. (a) What do you mean by Unified Process in OOAD? Explain the phases with suitable diagrams. (16)
Or
(b) By considering the Library Management system, perform the Object Oriented System Development and give the use case model for the same (use include, extend and generalization). (16)
12. (a) Explain the relationships that are possible among the classes in the UML representation with your own example. (16)
Or
(b) Explain the following with an example :
(i) Conceptual class diagram
(ii) Activity Diagram. (8 + 8)
13. (a) With a suitable example explain how to design a class. Give all possible representation in a class (name, attribute, visibility, methods, responsibilities). (16)
Or
(b) What do you mean by interaction diagrams? Explain them with a suitable example. (16)
14. (a) What is GRASP? Explain the design patterns and the principles used in it. (16)
Or
(b) What is design pattern? Explain the GoF design patterns. (16)
15. (a) Explain the state chart diagram with a suitable example. Also define its components and use. (16)
Or
(b) Consider the Hospital Management System application with the following requirements
(i) System should handle the in-patient, out-patient information through receptionist.
(ii) Doctors are allowed to view the patient history and give their prescription.
(iii) There should be a information system to provide the required information.
Give the state chart, component and deployment diagrams.(6 + 6 + 4)

ADVANCED COMPUTER ARCHITECTURE CS2354 NOVEMBER/DECEMBER 2011 ANNA UNIVERSITY QUESTION PAPER | CS2354 ACA PREVIOUS YEAR QUESTION PAPER


B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2011.
Sixth Semester
Computer Science and Engineering
CS 2354 — ADVANCED COMPUTER ARCHITECTURE
(Regulation 2008)

PART A — (10 × 2 = 20 marks)

1. What is instruction level parallelism?
2. What are the advantages of loop unrolling?
3. What are the limitations of VLIW?
4. What is the use of branch-target buffer?
5. Distinguish between shared memory multiprocessor and message-passing multiprocessor.
6. Differentiate multithreading computers from multiprocessor systems
7. Define the terms cache miss and cache hit.
8. What is RAID?
9. What is a multi-core processor?
10. What is a cell processor?


PART B — (5 × 16 = 80 marks)


11. (a) (i) Explain the data and name dependencies with suitable example. (10)
(ii) Discuss about the benefits and limitations of static branch prediction and dynamic branch prediction (6)
Or
(b) Briefly explain how to overcome data hazards with dynamic scheduling using Tomasula’s approach. (16)
12. (a) (i) Describe the architecture of Itanium processor with the help of a block diagram. (8)
(ii) Explain how ILP is achieved in EPIC processors (8)
Or
(b) (i) Describe the architectural features of IA64 processor in detail.(8)
(ii) What are the advantages and disadvantages of software-based and hardware-based speculation mechanism? (8)
13. (a) (i) Briefly compare instruction level parallelism with thread-level parallelism. (8)
(ii) Explain the basic architecture of a distributed memory multiprocessor system. (8)
Or
(b) (i) Explain various memory consistency models in detail. (10)
(ii) What is multithreading and what are the advantages of multithreading? (6)
14. (a) What is meant by cache coherence problem? Describe various protocols for cache coherence. (16)
Or
(b) Briefly explain various I/O performance measures. (16)
15. (a) (i) Describe the architecture of typical CMT processor. (8)
(ii) Discuss the design issues for simultaneous multithreading. (8)
Or
(b) (i) Explain the architectural features of IBM cell processor in detail. (10)
(ii) Briefly compare SMT and CMP architectures. (6)