Friday, 29 March 2013

POWER ELECTRONICS EE2301 ANNA UNIVERSITY NOVEMBER/DECEMBER 2010 PREVIOUS YEAR QUESTION PAPER


Subject Code : EE2301
Subject Name : POWER ELECTRONICS
Semester : Fifth Semester
Department : EEE

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2010
Fifth Semester
Electrical and Electronics Engineering
EE 2301 — POWER ELECTRONICS
(Common to Instrumentation and Control Engineering)
(Regulation 2008)

PART A — (10 × 2 = 20 Marks)

1. Draw the turn-on characteristics of TRIAC and mark the timings td, tr and ton?
2. What are the factors that influence the turn-off time of a thyristor?
3. Draw the circuit diagram of single phase dual converter.
4. Define the term voltage ripple factor, current ripple factor.
5. Mention any two disadvantages of frequency modulation control strategy.
6. What are the advantages of ZVS when compared to ZCS?
7. Differentiate VSI from CSI.
8. List various applications of phase controlled converters.
9. What is meant by cycloconverter?
10. Write the output R.M.S. voltage for single phase AC voltage controller with
resistance load.

PART B — (5 × 16 = 80 Marks)

11. (a) Explain the operation of IGBT with the help of neat structural diagram and suitable wave forms. (16)
(Or)
(b) (i) Draw the turn-off characteristics of an SCR and explain the mechanism of turn-off. (8)
(ii) What are the different methods for turning off an SCR? Explain all methods in detail. (8)
12. (a) (i) Describe the operation of a single phase two pulse bridge converter using 4 SCR'S with relevant waveforms. (10)
(ii) Discuss the working of above converter in the converter mode with RLE load. (6)
(Or)
(b) (i) A single phase semi converter is operated from 120 V 50 Hz ac supply. The load current with an average value Idc is continuous and ripple free firing angle α =π 6 . Determine.
(1) Displacement factor
(2) Harmonic factor of input current
(3) Input power factor. (10)
(ii) Write a note on battery charger. (6)
13. (a) (i) Discuss the principle of operation of DC-DC step down chopper with suitable waveform. Derive an expression for its average DC output voltage. (8)
(ii) A step-down dc chopper has a resistive load of R = 15 and input voltage Edc = 200 V. When the chopper remains ON, its voltage drop is 2.5 for a duty cycle of 0.5.
Calculate :
(1) Average and r.m.s value of output voltage
(2) Power delivered to the load. (8)
(Or)
(b) Draw the circuit of CUK regulator and explain its working principle with necessary waveform in detail. (16)
14. (a) (i) Describe the working of a 1φ pull bridge inverter with relevant circuit and waveforms. (8)
(ii) What is PWM? List the various PWM techniques and explain any one of them. (8)
(Or)
(b) Explain the Harmonic reduction by transformer corner lines and stepped wave inverters. (16)
15. (a) (i) Describe the operation of single phase full wave a.c voltage controller with the help of voltage and current waveform. Also derive the expression for average value of output voltage. (10)
(ii) For a single phase a.c regulator feeding a resistance load, show that power factor is given by the expression ( ) 2ππx . (6)
(Or)
(b) (i) Describe three-phase to three phase cycloconverter with relevant circuit arrangement using 18 thyristors. (8)
(ii) Show that the fundamentals RMS value of per phase output voltage of low frequency for an m-pulse cycloconverter is given by π πm n E Epn or sin . (8

CS2411 OPERATING SYSTEM NOV/DEC 2011 PREVIOUS YEAR ANNA UNIVERSITY QUESTION PAPER

Subject Code : CS2411
Subject Name : OPERATING SYSTEM (OS)
Semester : Seventh Semester
Department : EEE



ANNA UNIVERSITY MCA MCA ME PG ANNA UNIVERSITY MAY/JUNE 2013 TIMETABLE



------------------------------------------------------------------------------------------------------------------------------------------------
Incoming search terms
anna university pg time table may/june 2013
anna university time table for mba 2013
anna university mba exam time table may/june 2013
anna university chennai time table for mba
anna university mca time table may june 2013
anna university chennai mca exam time table 2013
1st year PG time table

Wednesday, 27 March 2013

Anna University Revaluation procedure for Nov / Dec / Jan 2013 Anna University Revaluation Procedure January 2012 UG/PG

All the candidates irrespective of the GRADE/MARK secured in the University Examinations can apply for Revaluation

To apply, a student can opt for any one of the following:

Option 1: Apply for Revaluation only with a fee of Rs.400/- per
script.

Option 2: Apply for Photocopy–cum–Revaluation with a fee of
Rs.700/- per script.

Only Candidates who have applied for Photocopy-cum-Revaluation Uare eligible for the Review for their answer script (by remitting the prescribed fee) after the Publication of the Revaluation Results, if not satisfied with the revalued results. Those who have applied Uonly for RevaluationU are Unot eligibleU for the
review of their answer scripts. The details of the UReview UProcedure will be announced along with the revaluation results.

Applying Revaluation/Photocopy cum Revaluation of January 2013 Examinations is available, last date for applying revaluation / revaluation cum photocopy is 05-04-2013

For More info Visit --> http://coe1.annauniv.edu/aucoe/forms/index.php

Like us in Facebook to get Anna university Just out updates


-----------------------------------------------------------------------------------------------------------------------------------
Related Tags
revaluation date for anna university chennai 2013
anna university revaluation last date 2013 1st sem BE ME MBA MCA
anna university chennai revaluation last date 2013 for 1st semester
anna university revaluation application form
how to apply for revaluation in anna university chennai, Coimbatore, Trichy, Thirunelveli, Madurai, Kovai
revaluation for anna university January 2013 first semester
anna university revaluation date for jan 2013