Tuesday, 16 April 2013

Anna University CE2203 Construction Techniques, Equipment and Practices Nov/Dec 2009 Question Paper

Semester : Third
Department : Civil
Subject Code : CE2203
Subject Title: CONSTRUCTION TECHNIQUES, EQUIPMENT AND PRACTICES


B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2009
Third Semester
Civil Engineering
CE 2203 - CONSTRUCTION TECHNIQUES, EQUIPMENT AND PRACTICES
(Regulation 2008)

PART A — (10 × 2 = 20 Marks)

1. State the importance of water cement ratio.
2. What are the tests to be conducted on fresh concrete?
3. How are bond stones placed in stone masonry?
4. What is ‘slip form’?
5. Differentiate cofferdam from caisson.
6. What do you understand about diaphragm walls?
7. What is meant by articulated structures?
8. Distinguish between space decks and bridge decks.
9. What is mucking?
10. What do you understand about truck agitators?

PART B — (5 × 16 = 80 Marks)

11. (a) Write down the complete procedure of mix design as per BIS.
Or
(b) Explain the method of conducting different non-destructive tests on concrete.
12. (a) Enumerate the procedure of constructing the following types of floorings :
(i) Terrazzo Flooring.
(ii) Tiled Flooring.
(iii) PVC Flooring.
(iv)Asphalt Flooring.
Or
(b)Bring out the general principles and factors in acoustical design of a hall.
13.(a)Explain the methods of dewatering the foundation trenches.
Or
(b)What is pneumatic caisson? Where is it adopted? How is it constructed?
14.(a)Illustrate about the support structures for heavy equipments and conveyors.
Or
(b)Describe the merits and demerits of various types of shells.
15.(a)Discuss the different compactors in detail.
Or
(b)What are the different types of cranes? Explain the types in detail.

Anna University CE2204 Surveying 1 Nov/Dec 2009 Question Paper

Semester : Third
Department : Civil
Subject Code :CE2204
Subject Title: CE2204 Surveying I

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2009
Third Semester
Civil Engineering
CE 2204 - SURVEYING - I
(Regulation 2008)

PART A — (10 × 2 = 20 Marks)

1. What are arrows?
2. What is plumb BOB?
3. What is magnetic meridian?
4. What is whole circle bearing?
5. What is foresight?
6. What is backsight?
7. What is centring of a theodolite?
8. What is face right observation?
9. What is tangent length in a simple curve?
10. What is mid-ordinate in a simple curve?

PART B — (5 × 16 = 80 Marks)

11.(a)Explain the method of direct ranging in detail.
Or
(b)Explain the method of reciprocal ranging in detail.
12. (a)Discuss the working principle of prismatic compass in detail.
Or
(b)Explain the two point proble method of plane table surveying.
13.(a)Explain the method of profile levelling.
Or
(b)Describe the three indirect methods of locating contours.
14.(a)Describe the essential parts of a transit theodolite.
Or
(b)Discuss the temporary adjustments of a transit theodolite.
15.(a)Explain the setting out of a simple curve by the Rankine’s method of tangential
angle.
Or
(b)Explain the setting out of a simple curve by two theodolite method. 

Sunday, 14 April 2013

Anna University UG/PG Changes & Additions - I May/June 2013 Exam timetable

Changes and Additions -I in UG/PG Examinations TimeTable - Affiliated Colleges MAY/JUNE 2013

Click the below links to get the timetable


Changes and Additions -I in UG May/June 2013 Timetable
Changes and Additions -I in PG May/June 2013 Timetable

Tuesday, 9 April 2013

Anna University EE 2201 -MEASUREMENTS AND INSTRUMENTATION Nov/Dec 2010 Question Paper

B.E./B.Tech. DEGREE EXAMINATION, NOVEMBER/DECEMBER 2010
Third Semester
EE 2201 -MEASUREMENTS AND INSTRUMENTATION
Electrical and Electronics Engineering(Regulation 2008) 

PART A — (10 × 2 = 20 Marks)


1. Define static characteristics of an instrument.
2. What is meant by absolute error of measurement?
3. Why are the ordinary watt-meters not suitable for low power factor circuits?
4. What is a phase sequence indicator?
5. List the application of D.C. potentiometers.
6. What are parasitic voltages and how are they eliminated?
7. What is the purpose of a Post Deflection Acceleration (PDA) in a CRT?
8. Differentiate between LED and LCD.
9. What are the classifications of encoder?
10. What is the need of sample and hold circuit in A/D converter?

PART B - (5 × 16 = 80 Marks)

11. (a) (i) Draw the block diagram of functional elements of measuring system
and explain the function of each block. (Marks 8)
(ii) Explain the different types of errors in measurements. (Marks 8)
OR
(b) (i) The probable values of two resistors and their S.D are specified as
R1 – 18.62, S.D = 0.025 , R2 = 74.48 , S.D. = 0.05 . Find the probable value and S.D for the two resistors when they are connected in
(1) Series and
(2) Parallel. (Marks 8)
(ii) Discuss the different types of standards of measurements. (Marks 8)

12. (a) (i) What are the various types of digital voltmeters? With a neat
sketch explain the working principle of any one type of a digital
voltmeter. (Marks 8)
(ii) With a neat diagram explain the construction and its working
principle of elector dynamo-meter type watt-meter. Also derive its
torque equation. (Marks 8)
OR
(b) (i) Explain the method of measurements of B.H curve of a ring
specimen with a neat diagram. (Marks 8)
(ii) Describe the construction and working principle of digital frequency
meter. (Marks 8)

13. (a) (i) Draw a neat sketch of a modern slide-wire D.C potentiometer and
discuss how the potentiometer is standardized. (Marks 8)
(ii) Describe how co-ordinate type potentiometer can be used for
calibration of a voltmeter and A.C energy meters. (Marks 8)
OR
(b) (i) Explain the theory and working principle of Kelvin's double bridge
method for measurement of low resistance. Derive the relation for
finding unknown resistance. (Marks 8)
(ii) Discuss briefly how Hay's Bridge can be used for the measurement
of inductance. (Marks 8)

14. (a) (i) Explain the construction and its working principle of X-Y Recorder.
(6)
(ii) Briefly discuss the features of digital plotters and printers. (Marks 10)
OR
(b) (i) Explain the working principle of electrostatic deflection system in a
CRT. (10)
(ii) Explain the working principle of digital storage oscilloscope. (Marks 6)

15. (a) (i) Explain the construction and working of unbounded and bonded
type strain gauges. (Marks 8)
(ii) Explain the construction and working of optical encoders with a
neat diagram. (Marks 8)
OR
(b) (i) Draw the generalized block diagram of a digital data acquisition
system and explain. (Marks 8)
(ii) Explain the successive approximation method of A/D converter. (8)