Friday, 5 July 2013

GE6162 ENGINEERING PRACTICES LABORATORY SYLLABUS - ANNA UNIVERSITY REGULATION 2013 SYLLABUS

ANNA UNIVERSITY CHENNAI -GE6162 ENGINEERING PRACTICES LABORATORY SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS


GE6162                ENGINEERING PRACTICES LABORATORY               L T P C - 0 0 3 2

OBJECTIVES:
  • To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.
GROUP A (CIVIL & MECHANICAL)
I CIVIL ENGINEERING PRACTICE
Buildings:
(a) Study of plumbing and carpentry components of residential and industrial buildings.Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions,
reducers, elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise:
Basic pipe connections – Mixed pipe material connection – Pipe connections with different
joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise: Wood work, joints by sawing, planing and cutting.

II MECHANICAL ENGINEERING PRACTICE
Welding:
(a) Preparation of arc welding of butt joints, lap joints and tee joints.
(b) Gas welding practice
Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays, funnels, etc.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example –Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and vee – fitting models.

GROUP B (ELECTRICAL & ELECTRONICS)
III ELECTRICAL ENGINEERING PRACTICE
1. Residential house wiring using switches, fuse, indicator, lamp and energy meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.
IV ELECTRONICS ENGINEERING PRACTICE
1. Study of Electronic components and equipments – Resistor, colour coding measurement
of AC signal parameter (peak-peak, rms period, frequency) using CR.
2. Study of logic gates AND, OR, EOR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general purpose PCB.
5. Measurement of ripple factor of HWR and FWR.

TOTAL: 45 PERIODS

REFERENCES:
1. Jeyachandran K., Natarajan S. & Balasubramanian S., “A Primer on Engineering
Practices Laboratory”, Anuradha Publications, (2007).
2. Jeyapoovan T., Saravanapandian M. & Pranitha S., “Engineering Practices Lab Manual”, Vikas
Puplishing House Pvt.Ltd, (2006)
3. Bawa H.S., “Workshop Practice”, Tata McGraw – Hill Publishing Company Limited, (2007).
4. Rajendra Prasad A. & Sarma P.M.M.S., “Workshop Practice”, Sree Sai Publication, (2002).
5. Kannaiah P. & Narayana K.L., “Manual on Workshop Practice”, Scitech Publications, (1999).

GE6152 Engineering Graphics syllabus - Anna university first sem regulation 2013 syllabus

ANNA UNIVERSITY CHENNAI
GE6152 Engineering Graphics SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS


GE6152                                         ENGINEERING GRAPHICS                           L T P C - 2 0 3 4


OBJECTIVES:
  • To develop in students, graphic skills for communication of concepts, ideas and design of Engineering products
  • To expose them to existing national standards related to technical drawings.
CONCEPTS AND CONVENTIONS (Not for Examination) 
Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering and
dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING
Basic Geometrical constructions, Curves used in engineering practices: Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of square and circle – Drawing of tangents and normal to the above curves, Scales: Construction of Diagonal and Vernier scales. Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three Dimensional objects – Layout of views- Free hand sketching of multiple views from pictorial views of objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES
Orthographic projection- principles-Principal planes-First angle projection-projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes -
Determination of true lengths and true inclinations by rotating line method and traces Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method.
UNIT III PROJECTION OF SOLIDS
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS
Principles of isometric projection – isometric scale –Isometric projections of simple solids and
truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in simple vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method .


COMPUTER AIDED DRAFTING (Demonstration Only)
Introduction to drafting packages and demonstration of their use.


TOTAL: 75 PERIODS


TEXT BOOK:
1. Bhatt N.D. and Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50th
Edition, 2010.


REFERENCES:
1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore, 2007.
2. Luzzader, Warren.J. and Duff,John M., “Fundamentals of Engineering Drawing with an
introduction to Interactive Computer Graphics for Design and Production, Eastern Economy
Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K. and Prabhu Raja V., “Engineering Graphics”, New Age International (P) Limited, 2008.
5. Natrajan K.V., “A text book of Engineering Graphics”, Dhanalakshmi Publishers, Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing Company
Limited, New Delhi, 2008. Publication of Bureau of Indian Standards:
1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing
sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.
Special points applicable to University Examinations on Engineering Graphics:
1 . There will be five questions, each of either or type covering all
units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The
students will be permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day

GE6151 Computer Programming syllabus- Anna university first sem regulation 2013 syllabus

ANNA UNIVERSITY CHENNAI
GE6151 Computer Programming SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS

GE6151                             COMPUTER PROGRAMMING                                          L T P C
                                                                                                                                    3 0 0 3
UNIT I INTRODUCTION
Generation and Classification of Computers- Basic Organization of a Computer –Number System –Binary – Decimal – Conversion – Problems. Need for logical analysis and thinking – Algorithm –Pseudo code – Flow Chart.
UNIT II C PROGRAMMING BASICS
Problem formulation – Problem Solving - Introduction to ‘ C’ programming –fundamentals – structure of a ‘C’ program – compilation and linking processes – Constants, Variables – Data Types – Expressions using operators in ‘C’ – Managing Input and Output operations – Decision Making and Branching – Looping statements – solving simple scientific and statistical problems.
UNIT III ARRAYS AND STRINGS
Arrays – Initialization – Declaration – One dimensional and Two dimensional arrays. String- String operations – String Arrays. Simple programs- sorting- searching – matrix operations.
UNIT IV FUNCTIONS AND POINTERS
Function – definition of function – Declaration of function – Pass by value – Pass by reference –
Recursion – Pointers - Definition – Initialization – Pointers arithmetic – Pointers and arrays- Example Problems.
UNIT V STRUCTURES AND UNIONS
Introduction – need for structure data type – structure definition – Structure declaration – Structure within a structure - Union - Programs using structures and Unions – Storage classes, Pre-processor directives.

TOTAL: 45 PERIODS

TEXTBOOKS:
1. Anita Goel and Ajay Mittal, “Computer Fundamentals and Programming in C”, Dorling Kindersley (India) Pvt. Ltd., Pearson Education in South Asia, 2011.
2. Pradip Dey, Manas Ghosh, “Fundamentals of Computing and Programming in C”, First Edition, Oxford University Press, 2009
3. Yashavant P. Kanetkar. “ Let Us C”, BPB Publications, 2011.

REFERENCES:
1. Byron S Gottfried, “Programming with C”, Schaum’s Outlines, Second Edition, Tata McGraw-Hill,
2006.
2. Dromey R.G., “How to Solve it by Computer”, Pearson Education, Fourth Reprint, 2007.
3. Kernighan,B.W and Ritchie,D.M, “The C Programming language”, Second Edition, Pearson
Education, 2006.

CY6151 Engineering Chemistry - I syllabus- Anna university regulation 2013 syllabus

ANNA UNIVERSITY CHENNAI
CY6151 Engineering Chemistry - 1 SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS

CY6151                                        ENGINEERING CHEMISTRY - I                         L T P C
                                                                                                                                    3 0 0 3
UNIT I POLYMER CHEMISTRY
Introduction: Classification of polymers – Natural and synthetic; Thermoplastic and Thermosetting. Functionality – Degree of polymerization. Types and mechanism of polymerization: Addition (Free Radical, cationic and anionic); condensation and copolymerization. Properties of polymers: Tg, Tacticity, Molecular weight – weight average, number average and polydispersity index. Techniques of polymerization: Bulk, emulsion, solution and suspension. Preparation, properties and uses of Nylon 6,6, and Epoxy resin.
UNIT II CHEMICAL THERMODYNAMICS
Terminology of thermodynamics - Second law: Entropy - entropy change for an ideal gas, reversible and irreversible processes; entropy of phase transitions; Clausius inequality. Free energy and work function: Helmholtz and Gibbs free energy functions (problems); Criteria of spontaneity; Gibbs- Helmholtz equation (problems); Clausius-Clapeyron equation; Maxwell relations – Van’t Hoff isotherm and isochore(problems).
UNIT III PHOTOCHEMISTRY AND SPECTROSCOPY
Photochemistry: Laws of photochemistry - Grotthuss–Draper law, Stark–Einstein law and Lambert- Beer Law. Quantum efficiency – determination- Photo processes - Internal Conversion, Inter-system crossing, Fluorescence, Phosphorescence, Chemiluminescence and Photo-sensitization. Spectroscopy: Electromagnetic spectrum - Absorption of radiation – Electronic, Vibrational and rotational transitions. UV-visible and IR spectroscopy – principles, instrumentation (Block diagram only).
UNIT IV PHASE RULE AND ALLOYS
Phase rule: Introduction, definition of terms with examples, One Component System- water system - Reduced phase rule - Two Component Systems- classification – lead-silver system, zinc-magnesium system. Alloys: Introduction- Definition- Properties of alloys- Significance of alloying, Functions and effect of alloying elements- Ferrous alloys- Nichrome and Stainless steel – heat treatment of steel; Non-ferrous alloys – brass and bronze.
UNIT V NANOCHEMISTRY
Basics - distinction between molecules, nanoparticles and bulk materials; size-dependent properties.nano particles: nano cluster, nano rod, nanotube(CNT) and nanowire. Synthesis: precipitation,thermolysis, hydrothermal, solvothermal, electrodeposition, chemical vapour deposition, laser ablation; Properties and applications
TOTAL :45 PERIODS
TEXT BOOKS
1.Jain P.C. and Monica Jain, “Engineering Chemistry”, Dhanpat Rai Publishing Company (P) Ltd.,New Delhi, 2010
2.Kannan P., Ravikrishnan A., “Engineering Chemistry”, Sri Krishna Hi-tech Publishing CompanyPvt. Ltd. Chennai, 2009
REFERENCES
1. Dara S.S, Umare S.S, “Engineering Chemistry”, S. Chand & Company Ltd., New Delhi 2010
2.Sivasankar B., “Engineering Chemistry”, Tata McGraw-Hill Publishing Company, Ltd., New
Delhi, 2008.
3.Gowariker V.R. , Viswanathan N.V. and JayadevSreedhar, “Polymer Science”, New Age
International P (Ltd.,), Chennai, 2006.
4.Ozin G. A. and Arsenault A. C., “Nanochemistry: A Chemical Approach to Nanomaterials”, RSC Publishing, 2005.