Friday, 8 November 2013

ANNA UNIVERSITY ME 2401 MECHATRONICS IMPORTANT QUESTIONS

ME 2401 MECHATRONICS
IMPORTANT QUESTIONS
ME 2401 MECHATRONICS IMPORTANT QUESTIONS
ME 2401 MECHATRONICS
IMPORTANT QUESTIONS
ME 2401 MECHATRONICS IMPORTANT QUESTIONS:

1. Write a detailed note on pressure measuring system & pressure measuring transducer.
2. Explain in detail about the characteristic of fluid flow and measurement of fluid velocity?
3. Explain the following
                    a) Thermo electric thermometry. 
                    b) Thermo resistive elements 
                   c) Thermocouple
4. Briefly explain any two mechatronics system with example?
5. Explain the following terms.
                   a) Sensitivity 
                   b) Hysteresis 
                   c) Stability and resolution
5. a) Describe the rotary type potentiometer?
    b) How is the capacitance measurement used  fordisplacement?
6. Explain the working principle of following sensors
                   a) Fiezo electric sensor.
                   b) Thermocouples.
7. Explain the various Gear Drives in Mechatronics system.
8. Discuss about the following actuation system?
                   i. Self- exited wound field shunt configuration dc motor.
                   ii. Self- exited wound field series configuration dc motor.
9. Give type of bearings and explain each.
10. Explain about speed control of AC and DC motor.
11. Explain working principle of 
                   a) AC servo Motor 
                   b) DCServomotor.
12. Discuss briefly model building block for Automatic Suspension System and electrical Motor.
13. Explain various type of control modes in detail.
14. Discuss briefly the following control modes 
                   a) PI controller 
                   b) PID controller.
15. Explain the basic structures of PLC and configuration of PLC.
16. Explain in detail about the data handling in PLC and.List the Considerations for Selection of PLC.
17. Draw the ladder diagram to represent
                   (1) two switches are normally open and both have to be closed for a motor to operate.
                   (2) Either of two, normally open switches have to be closed for a coil to be energized and operate an actuator?
                   (3) A motor is switched on by pressing a spring return bush button start switch and the motor remains on until another spring return bush button stop switch is pressed.

18. Explain Stages in Designing Mechatronics Systems in detail and Give Advantages of PLC system over traditional mechanical system.
19. Detail about the various functional components in Wireless Surveillance Balloon system.
20. Explain about the mechanical system design of an automatic car park barriers.

The above questions are only important questions,these questions may or may not come for the examination.So study all the question and give more importance to these questions also. 
We collected these questions from rejinpaul site.

AP7002 THREE DIMENSIONAL NETWORKS ON CHIP - ANNA UNIV PG 1ST SEM SYLLABUS

ANNA UNIVERSITY, CHENNAI
REGULATIONS - 2013
M.E. APPLIED ELECTRONICS
AP7002 THREE DIMENSIONAL NETWORKS ON CHIP

COURSE OBJECTIVES:
 To introduce the concept of 3D NOC.
 To study the architectures and protocols of 3D NOC.
 To identify the types of fault and study the testing methods for fault rectification.
 To learn DimDE router for 3D NOC.

UNIT I INTRODUCTION TO THREE DIMENSIONAL NOC
Three-Dimensional Networks-on-Chips Architectures. – Resource Allocation for QoSOn-Chip
Communication – Networks-on-Chip Protocols-On-Chip Processor Traffic Modeling for
Networks-on-Chip

UNIT II TEST AND FAULT TOLERANCE OF NOC
Design-Security in Networks-on-Chips-Formal Verification of Communications in Networks-on-
Chips-Test and Fault Tolerance for Networks-on-Chip Infrastructures-Monitoring Services for
Networks-on-Chips.

UNIT III ENERGY AND POWER ISSUES OF NOC
Energy and Power Issues in Networks-on-Chips-The CHAIN works Tool Suite: AComplete
Industrial Design Flow for Networks-on-Chips

UNIT IV MICRO-ARCHITECTURE OF NOC ROUTER
Baseline NoC Architecture – MICRO-Architecture Exploration ViChaR: A Dynamic Virtual
Channel Regulator for NoC Routers- RoCo: The Row-Column Decoupled Router – A Gracefully
Degrading and Energy-Efficient Modular Router Architecture for On-Chip Networks. Exploring
Fault Tolerant Networks-on-Chip Architectures.

UNIT V DIMDE ROUTER FOR 3D NOC
A Novel Dimensionally-Decomposed Router for On-Chip Communication in 3D Architectures-
Digest of Additional NoC MACRO-Architectural Research.

TOTAL: 45 PERIODS

REFERENCES:
1. Chrysostomos Nicopoulos, Vijaykrishnan Narayanan, Chita R.Das” Networks-on - Chip “
Architectures A Holistic Design Exploration”, Springer.
2. Fayezgebali, Haythamelmiligi, Hqhahed Watheq E1-Kharashi “Networks-on-Chips theory
and practice CRC press.

Wednesday, 6 November 2013

TET 2013 RESULTS ANNOUNCED - Tamil Nadu Teachers Eligibility Test 2013 RESULTS PUBLISHED - www.trb.tn.nic.in

TAMIL NADU TEACHERS ELIGIBILITY TEST 2013 RESULTS HAVE BEEN PUBLISHED IN THE OFFICIAL TEACHERS RECRUITMENT BOARD WEBSITE.HERE WE HAVE PROVIDED LINK OF THAT WEBSITE TO CHECK YOUR TET 2013 RESULTS.

TET 2013 RESULTS PUBLISHED
PROVISIONAL MARK LIST FOR PAPER I  -  Click here
PROVISIONAL MARK LIST FOR PAPER II - Click here


TAMIL NADU TEACHERS ELIGIBILITY TEST 2013 - ANSWER KEY DOWNLOAD:




TET 2013 RESULTS PUBLISHING WEBSITE-HOW TO CHECK TET 2013 RESULT-TET 2013 RESULTS ANNOUNCED OR NOT-WWW.TRB.TN.NIC.IN WEBSITE-TEACHERS RECRUITMENT BOARD WEBSITE-TRB WEBSITE TO CHECK TET RESULTS 2013-TAMILNADU TEACHERS ELIGIBILITY TEST 2013 RESULTS PUBLISHED IN TRB WEBSITE

Monday, 4 November 2013

ANNA UNIVERSITY EE2401 POWER SYSTEM OPERATION & CONTROL IMPORTANT QUESTIONS | PSOE EEE IMP QUES

EE2401 POWER SYSTEM OPERATION & CONTROL
IMPORTANT QUESTIONS
EEE SEVENTH SEMESTER-REGULATION 2008
EE2401-PSOE QUESTIONS-EEE
EE2401-PSOE IMPORTANT QUESTIONS:

Unit-1
1) Explain plant level and system level control with neat diagram.
2) Explain Load forecasting.
3) Explain Load curve and Load duration curve.
4) Explain Q-V control loop and P-F control loop with diagram.

Unit-2
1) Speed Governing mechanism and modeling.
2) LFC control of single area system with static and dynamic analysis.
3) Load sharing between alternators.
4) Explain LFC control of double area system in detail.

Unit-3
1) Explain the methods of voltage control.
2) Explain the relationship between voltage power and reactive power at a node.
3) Explain briefly about Role of tap changing transformer.
4) Explain typical excitation system with neat diagram and derive TP model.

Unit-4
1) Various constraints in unit commitments ?
2) Explain steps involved in slowing Vc by dynamic programming method.
3) Explain Vc problem using priority list method.
4) Explain λ-iteration for finding solution of Economic dispatch problem with and without loss.
5) Explain λ-iteration method to find solution of EDP with and without loss.

Unit-5
1) Functions of SCADA and its types
2) Energy management system.
3) Security analysis and control.
4) Various state transitions and control strategies using state transition diagram.
5) Derive deterministic state estimation using WLSE method.
6) Various functions of energy control center.

Study problems to score good marks.The above questions are only important questions,these questions may or may not come for the examination.So study all the question and give more importance to these questions also. 
We collected these questions from rejinpaul site.