Wednesday, 26 December 2012

PHYSICS LABORATORY – I SYLLABUS | ANNA UNIVERSITY FIRST SEMESTER SYLLABUS

LIST OF EXPERIMENTS
1. (a) Particle size determination using Diode Laser
(b) Determination of Laser parameters – Wavelength, and angle of
divergence.
(c) Determination of acceptance angle in an optical fiber.

2. Determination of thickness of a thin wire – Air wedge method

3. Determination of velocity of sound and compressibility of liquid – Ultrasonic
interferometer.

4. Determination of wavelength of mercury spectrum – spectrometer grating.

5. Determination of thermal conductivity of a bad conductor – Lee’s Disc
method.

6. Determination of Hysteresis loss in a ferromagnetic material

• A minimum of FIVE experiments shall be offered.
• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

CHEMISTRY LABORATORY – I SYLLABUS | ANNA UNIVERSITY FIRST SEMESTER SYLLABUS

LIST OF EXPERIMENTS

1. Estimation of hardness of Water by EDTA
2. Estimation of Copper in brass by EDTA
3. Determination of DO in water ( Winkler’s method)
4. Estimation of Chloride in Water sample (Argentometric)
5. Estimation of alkalinity of Water sample
6. Determination of molecular weight and degree of polymerization using
viscometry.

• A minimum of FIVE experiments shall be offered.
• Laboratory classes on alternate weeks for Physics and Chemistry.
• The lab examinations will be held only in the second semester.

GE2116 ENGINEERING PRACTICES LABORATORY SYLLABUS | ANNA UNIVERSITY FIRST SEMESTER SYLLABUS

OBJECTIVES
To provide exposure to the students with hands on experience on various basic
engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.

GROUP A (CIVIL & MECHANICAL)

I CIVIL ENGINEERING PRACTICE
Buildings:
(a) Study of plumbing and carpentry components of residential and industrial
buildings. Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings,
unions, reducers, elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise:
Basic pipe connections – Mixed pipe material connection – Pipe
connections with different joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise:
Wood work, joints by sawing, planing and cutting.

II MECHANICAL ENGINEERING PRACTICE
Welding:
(a) Preparation of arc welding of butt joints, lap joints and tee joints.
(b) Gas welding practice
Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays, funnels, etc.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example –
Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and vee – fitting models.

GROUP B (ELECTRICAL & ELECTRONICS)


III ELECTRICAL ENGINEERING PRACTICE
1. Residential house wiring using switches, fuse, indicator, lamp and energy
meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power
factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.

IV ELECTRONICS ENGINEERING PRACTICE
1. Study of Electronic components and equipments – Resistor, colour coding
measurement of AC signal parameter (peak-peak, rms period, frequency)
using CR.
2. Study of logic gates AND, OR, EOR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general
purpose PCB.
5. Measurement of ripple factor of HWR and FWR.

TOTAL: 45 PERIODS

REFERENCES:
1. K.Jeyachandran, S.Natarajan & S, Balasubramanian, “A Primer on Engineering
Practices Laboratory”, Anuradha Publications, (2007).
2. T.Jeyapoovan, M.Saravanapandian & S.Pranitha, “Engineering Practices Lab
Manual”, Vikas Puplishing House Pvt.Ltd, (2006)
3. H.S. Bawa, “Workshop Practice”, Tata McGraw – Hill Publishing Company Limited,
(2007).
4. A.Rajendra Prasad & P.M.M.S. Sarma, “Workshop Practice”, Sree Sai Publication,
(2002).
5. P.Kannaiah & K.L.Narayana, “Manual on Workshop Practice”, Scitech Publications,
(1999).

SEMESTER EXAMINATION PATTERN
The Laboratory examination is to be conducted for Group A & Group B, allotting 90
minutes for each group, with a break of 15 minutes. Both the examinations are to be
taken together in sequence, either in the FN session or in the AN session. The maximum
marks for Group A and Group B lab examinations will be 50 each, totaling 100 for the
Lab course. The candidates shall answer either I or II under Group A and either III or IV
under Group B, based on lots.
14
Engineering Practices Laboratory
List of equipment and components
(For a Batch of 30 Students)
CIVIL
1. Assorted components for plumbing consisting of metallic pipes,
plastic pipes, flexible pipes, couplings, unions, elbows, plugs and
other fittings. 15 Sets.
2. Carpentry vice (fitted to work bench) 15 Nos.
3. Standard woodworking tools 15 Sets.
4. Models of industrial trusses, door joints, furniture joints 5 each
5. Power Tools: (a) Rotary Hammer 2 Nos
(b) Demolition Hammer 2 Nos
(c) Circular Saw 2 Nos
(d) Planer 2 Nos
(e) Hand Drilling Machine 2 Nos
(f) Jigsaw 2 Nos
MECHANICAL
1. Arc welding transformer with cables and holders 5 Nos.
2. Welding booth with exhaust facility 5 Nos.
3. Welding accessories like welding shield, chipping hammer,
wire brush, etc. 5 Sets.
4. Oxygen and acetylene gas cylinders, blow pipe and other
welding outfit. 2 Nos.
5. Centre lathe 2 Nos.
6. Hearth furnace, anvil and smithy tools 2 Sets.
7. Moulding table, foundry tools 2 Sets.
8. Power Tool: Angle Grinder 2 Nos
9. Study-purpose items: centrifugal pump, air-conditioner One each.
ELECTRICAL
1. Assorted electrical components for house wiring 15 Sets
2. Electrical measuring instruments 10 Sets
3. Study purpose items: Iron box, fan and regulator, emergency lamp 1 each
4. Megger (250V/500V) 1 No.
5. Power Tools: (a) Range Finder 2 Nos
(b) Digital Live-wire detector 2 Nos
ELECTRONICS 1. Soldering guns 10 Nos.
2. Assorted electronic components for making circuits 50 Nos.
3. Small PCBs 10 Nos.
4. Multimeters 10 Nos.
5. Study purpose items: Telephone, FM radio, low-voltage power
supply

GE2115 COMPUTER PRACTICE LABORATORY – I SYLLABUS|ANNA UNIVERSITY FIRST SEMESTER SYLLABUS

LIST OF EXERCISES

a) Word Processing 
1. Document creation, Text manipulation with Scientific notations.
2. Table creation, Table formatting and Conversion.
3. Mail merge and Letter preparation.
4. Drawing - flow Chart

b) Spread Sheet 15
5. Chart - Line, XY, Bar and Pie.
6. Formula - formula editor.
7. Spread sheet - inclusion of object, Picture and graphics, protecting the document
and sheet.
8. Sorting and Import / Export features.
Simple C Programming * 15
9. Data types, Expression Evaluation, Condition Statements.
10. Arrays
11. Structures and Unions
12. Functions

TOTAL: 45 PERIODS

* For programming exercises Flow chart and pseudocode are essential
HARDWARE / SOFTWARE REQUIRED FOR A BATCH OF 30 STUDENTS
Hardware
LAN System with 33 nodes (OR) Standalone PCs – 33 Nos.
Printers – 3 Nos.
Software
OS – Windows / UNIX Clone
Application Package – Office suite
Compiler – C