Friday, 5 July 2013

GE6161 COMPUTER PRACTICES LABORATORY SYLLABUS-ANNA UNIVERSITY REGULATION 2013 SYLLABUS

ANNA UNIVERSITY CHENNAI - GE6161 COMPUTER PRACTICES LABORATORY SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS

LIST OF EXPERIMENTS:
1. Search, generate, manipulate data using MS office/ Open Office
2. Presentation and Visualization – graphs, charts, 2D, 3D
3. Problem formulation, Problem Solving and Flowcharts
4. C Programming using Simple statements and expressions
5. Scientific problem solving using decision making and looping.
6. Simple programming for one dimensional and two dimensional arrays.
7. Solving problems using String functions
8. Programs with user defined functions – Includes Parameter Passing
9. Program using Recursive Function and conversion from given program to flow chart.
10. Program using structures and unions.

TOTAL : 45 PERIODS

GE6163 PHYSICS AND CHEMISTRY LABORATORY – I SYLLABUS- ANNA UNIVERSITY REGULATION 2013 SYLLABUS

GE6163         PHYSICS AND CHEMISTRY LABORATORY – I            L T P C - 0 0 2 1

PHYSICS LABORATORY – I
LIST OF EXPERIMENTS
(Any FIVE Experiments)
1 (a) Determination of Wavelength, and particle size using Laser
   (b) Determination of acceptance angle in an optical fiber.
2. Determination of velocity of sound and compressibility of liquid – Ultrasonic interferometer.
3. Determination of wavelength of mercury spectrum – spectrometer grating
4. Determination of thermal conductivity of a bad conductor – Lee’s Disc method.
5. Determination of Young’s modulus by Non uniform bending method
6. Determination of specific resistance of a given coil of wire – Carey Foster’s Bridge


CHEMISTRY LABORATORY-I
LIST OF EXPERIMENTS
(Any FIVE Experiments)

1 Determination of DO content of water sample by Winkler’s method.
2 Determination of chloride content of water sample by argentometric method
3 Determination of strength of given hydrochloric acid using pH meter
4 Determination of strength of acids in a mixture using conductivity meter
5 Estimation of iron content of the water sample using spectrophotometer

  (1,10-phenanthroline / thiocyanate method)
6 Determination of molecular weight of polyvinylalcohol using Ostwald viscometer
7 Conductometric titration of strong acid vs strong base


TOTAL: 30 PERIODS


REFERENCES:
1. Daniel R. Palleros, “Experimental organic chemistry” John Wiley & Sons, Inc., New Yor (2001).
2. Furniss B.S. Hannaford A.J, Smith P.W.G and Tatchel A.R., “Vogel’s Textbook of
practical organic chemistry”, LBS Singapore (1994).
3. Jeffery G.H., Bassett J., Mendham J.and Denny vogel’s R.C, “Text book of quantitative
analysis chemical analysis”, ELBS 5th Edn. Longman, Singapore publishers, Singapore, 1996.
4. Kolthoff I.M., Sandell E.B. et al. “Quantitative chemical analysis”, Mcmillan, Madras 1980.

GE6162 ENGINEERING PRACTICES LABORATORY SYLLABUS - ANNA UNIVERSITY REGULATION 2013 SYLLABUS

ANNA UNIVERSITY CHENNAI -GE6162 ENGINEERING PRACTICES LABORATORY SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS


GE6162                ENGINEERING PRACTICES LABORATORY               L T P C - 0 0 3 2

OBJECTIVES:
  • To provide exposure to the students with hands on experience on various basic engineering practices in Civil, Mechanical, Electrical and Electronics Engineering.
GROUP A (CIVIL & MECHANICAL)
I CIVIL ENGINEERING PRACTICE
Buildings:
(a) Study of plumbing and carpentry components of residential and industrial buildings.Safety aspects.
Plumbing Works:
(a) Study of pipeline joints, its location and functions: valves, taps, couplings, unions,
reducers, elbows in household fittings.
(b) Study of pipe connections requirements for pumps and turbines.
(c) Preparation of plumbing line sketches for water supply and sewage works.
(d) Hands-on-exercise:
Basic pipe connections – Mixed pipe material connection – Pipe connections with different
joining components.
(e) Demonstration of plumbing requirements of high-rise buildings.
Carpentry using Power Tools only:
(a) Study of the joints in roofs, doors, windows and furniture.
(b) Hands-on-exercise: Wood work, joints by sawing, planing and cutting.

II MECHANICAL ENGINEERING PRACTICE
Welding:
(a) Preparation of arc welding of butt joints, lap joints and tee joints.
(b) Gas welding practice
Basic Machining:
(a) Simple Turning and Taper turning
(b) Drilling Practice
Sheet Metal Work:
(a) Forming & Bending:
(b) Model making – Trays, funnels, etc.
(c) Different type of joints.
Machine assembly practice:
(a) Study of centrifugal pump
(b) Study of air conditioner
Demonstration on:
(a) Smithy operations, upsetting, swaging, setting down and bending. Example –Exercise – Production of hexagonal headed bolt.
(b) Foundry operations like mould preparation for gear and step cone pulley.
(c) Fitting – Exercises – Preparation of square fitting and vee – fitting models.

GROUP B (ELECTRICAL & ELECTRONICS)
III ELECTRICAL ENGINEERING PRACTICE
1. Residential house wiring using switches, fuse, indicator, lamp and energy meter.
2. Fluorescent lamp wiring.
3. Stair case wiring
4. Measurement of electrical quantities – voltage, current, power & power factor in RLC circuit.
5. Measurement of energy using single phase energy meter.
6. Measurement of resistance to earth of an electrical equipment.
IV ELECTRONICS ENGINEERING PRACTICE
1. Study of Electronic components and equipments – Resistor, colour coding measurement
of AC signal parameter (peak-peak, rms period, frequency) using CR.
2. Study of logic gates AND, OR, EOR and NOT.
3. Generation of Clock Signal.
4. Soldering practice – Components Devices and Circuits – Using general purpose PCB.
5. Measurement of ripple factor of HWR and FWR.

TOTAL: 45 PERIODS

REFERENCES:
1. Jeyachandran K., Natarajan S. & Balasubramanian S., “A Primer on Engineering
Practices Laboratory”, Anuradha Publications, (2007).
2. Jeyapoovan T., Saravanapandian M. & Pranitha S., “Engineering Practices Lab Manual”, Vikas
Puplishing House Pvt.Ltd, (2006)
3. Bawa H.S., “Workshop Practice”, Tata McGraw – Hill Publishing Company Limited, (2007).
4. Rajendra Prasad A. & Sarma P.M.M.S., “Workshop Practice”, Sree Sai Publication, (2002).
5. Kannaiah P. & Narayana K.L., “Manual on Workshop Practice”, Scitech Publications, (1999).

GE6152 Engineering Graphics syllabus - Anna university first sem regulation 2013 syllabus

ANNA UNIVERSITY CHENNAI
GE6152 Engineering Graphics SYLLABUS
REGULATION - 2013
FIRST SEMESTER SYLLABUS


GE6152                                         ENGINEERING GRAPHICS                           L T P C - 2 0 3 4


OBJECTIVES:
  • To develop in students, graphic skills for communication of concepts, ideas and design of Engineering products
  • To expose them to existing national standards related to technical drawings.
CONCEPTS AND CONVENTIONS (Not for Examination) 
Importance of graphics in engineering applications – Use of drafting instruments – BIS
conventions and specifications – Size, layout and folding of drawing sheets – Lettering and
dimensioning.
UNIT I PLANE CURVES AND FREE HAND SKETCHING
Basic Geometrical constructions, Curves used in engineering practices: Conics – Construction of ellipse, parabola and hyperbola by eccentricity method – Construction of cycloid – construction of involutes of square and circle – Drawing of tangents and normal to the above curves, Scales: Construction of Diagonal and Vernier scales. Visualization concepts and Free Hand sketching: Visualization principles –Representation of Three Dimensional objects – Layout of views- Free hand sketching of multiple views from pictorial views of objects
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES
Orthographic projection- principles-Principal planes-First angle projection-projection of points.
Projection of straight lines (only First angle projections) inclined to both the principal planes -
Determination of true lengths and true inclinations by rotating line method and traces Projection of planes (polygonal and circular surfaces) inclined to both the principal planes by rotating object method.
UNIT III PROJECTION OF SOLIDS
Projection of simple solids like prisms, pyramids, cylinder, cone and truncated solids when the axis is inclined to one of the principal planes by rotating object method and auxiliary plane method.
UNIT IV PROJECTION OF SECTIONED SOLIDS AND DEVELOPMENT OF SURFACES
Sectioning of above solids in simple vertical position when the cutting plane is inclined to the one of the principal planes and perpendicular to the other – obtaining true shape of section. Development of lateral surfaces of simple and sectioned solids – Prisms, pyramids cylinders and cones. Development of lateral surfaces of solids with cut-outs and holes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS
Principles of isometric projection – isometric scale –Isometric projections of simple solids and
truncated solids - Prisms, pyramids, cylinders, cones- combination of two solid objects in simple vertical positions and miscellaneous problems. Perspective projection of simple solids-Prisms, pyramids and cylinders by visual ray method .


COMPUTER AIDED DRAFTING (Demonstration Only)
Introduction to drafting packages and demonstration of their use.


TOTAL: 75 PERIODS


TEXT BOOK:
1. Bhatt N.D. and Panchal V.M., “Engineering Drawing”, Charotar Publishing House, 50th
Edition, 2010.


REFERENCES:
1. Gopalakrishna K.R., “Engineering Drawing” (Vol. I&II combined), Subhas Stores, Bangalore, 2007.
2. Luzzader, Warren.J. and Duff,John M., “Fundamentals of Engineering Drawing with an
introduction to Interactive Computer Graphics for Design and Production, Eastern Economy
Edition, Prentice Hall of India Pvt. Ltd, New Delhi, 2005.
3. Shah M.B., and Rana B.C., “Engineering Drawing”, Pearson, 2nd Edition, 2009.
4. Venugopal K. and Prabhu Raja V., “Engineering Graphics”, New Age International (P) Limited, 2008.
5. Natrajan K.V., “A text book of Engineering Graphics”, Dhanalakshmi Publishers, Chennai, 2009.
6. Basant Agarwal and Agarwal C.M., “Engineering Drawing”, Tata McGraw Hill Publishing Company
Limited, New Delhi, 2008. Publication of Bureau of Indian Standards:
1. IS 10711 – 2001: Technical products Documentation – Size and lay out of drawing
sheets.
2. IS 9609 (Parts 0 & 1) – 2001: Technical products Documentation – Lettering.
3. IS 10714 (Part 20) – 2001 & SP 46 – 2003: Lines for technical drawings.
4. IS 11669 – 1986 & SP 46 – 2003: Dimensioning of Technical Drawings.
5. IS 15021 (Parts 1 to 4) – 2001: Technical drawings – Projection Methods.
Special points applicable to University Examinations on Engineering Graphics:
1 . There will be five questions, each of either or type covering all
units of the syllabus.
2. All questions will carry equal marks of 20 each making a total of 100.
3. The answer paper shall consist of drawing sheets of A3 size only. The
students will be permitted to use appropriate scale to fit solution within A3 size.
4. The examination will be conducted in appropriate sessions on the same day